Bag dust removal equipment applied in north and south
On the south side where the air humidity is relatively high, the body of the bag dust removal equipment is more rusty and corrosive than the monotonous north. The rust must be removed on time, and the anti-corrosion topcoat is painted. If the insulation layer is damaged due to this, Also need to be revised or replaced in time. Because the climate is monotonous in the north, the probability and severity of rusting and corrosion due to climate elements are less than those in the south.
In terms of climate, the south is dominated by subtropical monsoon climate, while the north is dominated by temperate continental climate and temperate monsoon climate. In the subtropical monsoon climate zone, the winter temperature is widely above 0 ℃, and the summer maximum temperature is at 35 ℃. The annual precipitation is usually above 800-1000mm, which is attributed to the humid area. The temperate continental climate zone has a large annual temperature difference due to cold winter and hot summer. The lowest temperature must be -70 ℃ in winter, and the average temperature in the southern part of summer is 26-27 ℃ in July, and the northern part is close to 20 ℃. The highest temperature must be 50 ℃. The difference is 62.3 ℃, and the average annual precipitation is less than 500mm. The temperature difference in the temperate monsoon climate zone is smaller than that in the temperate continental climate zone, and there is more precipitation. However, as a whole, there are still large temperature differences and less precipitation.
Doing a good job in the thermal insulation of the bag dust removal equipment is particularly important for the temperatureless conditions in the north in winter. The bag dust removal equipment should prevent the gas from cooling below the dew point in the bag room. If the temperature of the gas in the bag room is lower than the dew point, the filter bag will be damp, so that the dust is not loose but sticky to the filter bag, and the fabric holes Blockage, which constitutes a failure to clean the dust, makes the pressure of the bag dust removal equipment too large, and the working power of the composition becomes worse, and even the slack bag cannot continue to work. Even need to choose the method of electric heating. The main feature of the climate conditions in the south is that the precipitation is satisfied. The dust collectors must be more careful to prevent leakage and moisture during manufacturing, and they must also pay attention to protection and repair operations in these two aspects in the later period.
The southern part of China is dominated by light industry, and the heavy industry in the Yangtze River Delta is also very developed; while the northern part is dominated by heavy industry, such as steel, machinery, and non-ferrous metals. According to this difference in industrial structure, cloth bag dust removal equipment is mostly medium to large in the north, and small and medium bag dust removal equipment is mostly used in the south to remove large power and other industries in the steel industry.
The bag dust removal equipment professionally produced by Shanghai Qihuang also shows different characteristics in the process of being put into use in the north and south. In the design, production and installation process, regional climate factors are fully considered.
Telephone: (Miss Huang) 186-1609-6121 (WeChat) (Miss Yin) 136-7154-8349 (WeChat) Company telephone: 021-50422660
