Product Description
The pulse controller uses an industrial-grade chip as the control core; there are obvious setting marks on the printed circuit board, which can conveniently set the controller; the output side of the controller has work instructions for each output point, which can quickly determine the output point Status; the controller is equipped with manual operation buttons, which can facilitate the commissioning and operation of the equipment; the pulse controller uses a waterproof shell structure, with waterproof connectors, can be used in outdoor, dust environment; and the pulse controller is equipped with pluggable The dedicated terminals of the printed circuit board can be easily connected.
The output of each output controls the opening of the electromagnetic pulse valve, blowing compressed air to clean the dust, and there are light-emitting diodes to show the blowing sequence. During dust cleaning, the dust is sprayed while filtering, and the pulse controller outputs electrical signals according to the set pulse width and pulse interval to control the pulse valve to spray the dust one by one.
Technical index of pulse controller:
Number of output channels: 1 to 36 channels are optional (18 channels +1, 24 channels +1) 1 channel is for ash discharge;
The control parameters are set at any time, and the setting parameters are not lost after power off;
Running signal: support remote start / stop control (optional);
Can achieve online (sequential pulse), offline (lift + pulse) control;
Support ash discharge control; (need to be customized)
Dimensions: 260 × 185 × 96, 195 × 120 × 80, 248 × 188 × 100 (mm);
